document number: 34015 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 13-apr-11 1 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 filter inductors, high current, radial leaded ihb vishay dale electrical specifications inductance: measured at 1.0 v with zero dc current dielectric: 2500 v rms between winding and 0.250" [6.35 mm] of insulating co vering edge (with optional insulating covering) current rating: maximum continuous operating current based on a + 50 c temperature rise operating temperature: - 55 c to + 130 c (no load), - 55 c to + 80 c (at full rated current) features ? printed circuit mounting ? wide range of inductance and current ratings ? pre-tinned leads ? optional polyolefin tubi ng and printing available at additional cost ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition mechanical specifications terminals: extensions of the winding wire, solder coated to within 0.063" [1.60 mm] of body mounting: center hole for mechanical mounting, insulated bushings recommended fo r center hole mounting notes (1) e varies between components, see individual model specifications for details, tolerance of 0.035 (2) f varies between components, see individual model specifications for details dimensions in inches [millimeters] model a (max.) b (max.) d (min.) ihb-1 0.660 [16.76] 0.840 [21.34] 0.115 [2.92] ihb-2 0.825 [20.96] 0.840 [21.34] 0.115 [2.92] ihb-3 1.100 [27.94] 0.840 [21.34] 0.115 [2.92] ihb-4 1.600 [40.64] 1.030 [26.16] 0.175 [4.45] ihb-5 1.600 [40.64] 1.450 [36.83] 0.175 [4.45] ihb-6 2.000 [50.80] 1.500 [38.10] 0.240 [6.10] standard electrical specifications model ind. at 1 khz (h) tol. (%) dcr max. ( ? ) rated dc current (ma) approx. lead e spacing maximum lead f diameter ihb-1 1.0 20 0.003 9000 0.450 [11.43] 0.045 [1.15] ihb-1 1.2 20 0.003 9000 0.450 [11.43] 0.045 [1.15] ihb-1 1.5 20 0.004 9000 0.450 [11.43] 0.045 [1.15] ihb-1 1.8 20 0.004 9000 0.450 [11.43] 0.045 [1.15] ihb-1 2.2 20 0.005 9000 0.450 [11.43] 0.045 [1.15] ihb-1 2.7 20 0.005 9000 0.450 [11.43] 0.045 [1.15] ihb-1 3.3 20 0.005 9000 0.450 [11.43] 0.045 [1.15] ihb-1 3.9 20 0.006 9000 0.450 [11.43] 0.045 [1.15] ihb-1 4.7 20 0.007 9000 0.450 [11.43] 0.045 [1.15] ihb-1 5.6 20 0.007 9000 0.450 [11.43] 0.045 [1.15] ihb-1 6.8 20 0.008 9000 0.450 [11.43] 0.045 [1.15] ihb-1 8.2 20 0.009 9000 0.450 [11.43] 0.045 [1.15] ihb-1 10 10 0.010 9000 0.450 [11.43] 0.045 [1.15] ihb-1 12 10 0.011 9000 0.450 [11.43] 0.045 [1.15] ihb-1 15 10 0.015 7200 0.450 [11.43] 0.040 [1.02] ihb-1 18 10 0.016 7200 0.450 [11.43] 0.040 [1.02] ihb-1 22 10 0.020 5500 0.450 [11.43] 0.040 [1.02] ihb-1 27 10 0.030 4500 0.450 [11.43] 0.032 [0.812] ihb-1 33 10 0.040 4000 0.475 [12.07] 0.028 [0.723] ihb-1 39 10 0.046 4000 0.475 [12.07] 0.028 [0.723] f (2) d dia. a dia. e (1) b 0.500 0.062 [12.70 1.57]
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34015 2 revision: 13-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ihb vishay dale filter inductors, high current, radial leaded ihb-1 47 10 0.062 2800 0.470 [11.94] 0.025 [0.644] ihb-1 56 10 0.069 2800 0.470 [11.94] 0.025 [0.644] ihb-1 68 10 0.077 2800 0.500 [12.70] 0.025 [0.644] ihb-1 82 10 0.083 2800 0.500 [12.70] 0.025 [0.644] ihb-1 100 10 0.095 2800 0.500 [12.70] 0.025 [0.644] ihb-1 120 10 0.127 2000 0.500 [12.70] 0.023 [0.573] ihb-1 150 10 0.181 1600 0.500 [12.70] 0.020 [0.510] ihb-1 180 10 0.217 1600 0.500 [12.70] 0.020 [0.510] ihb-1 220 10 0.240 1600 0.500 [12.70] 0.020 [0.510] ihb-1 270 10 0.300 1600 0.480 [12.19] 0.018 [0.455] ihb-1 330 10 0.336 1300 0.480 [12.19] 0.018 [0.455] ihb-1 390 10 0.460 1000 0.480 [12.19] 0.016 [0.405] ihb-1 470 10 0.636 800 0.475 [12.07] 0.014 [0.361] ihb-1 560 10 0.696 800 0.475 [12.07] 0.014 [0.361] ihb-2 1.0 20 0.003 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 1.2 20 0.003 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 1.5 20 0.003 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 1.8 20 0.003 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 2.2 20 0.004 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 2.7 20 0.005 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 3.3 20 0.005 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 3.9 20 0.005 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 4.7 20 0.005 11 400 0.620 [15.75] 0.051[1.29] ihb-2 5.6 20 0.006 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 6.8 20 0.007 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 8.2 20 0.007 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 10 10 0.009 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 12 10 0.009 11 400 0.620 [15.75] 0.051 [1.29] ihb-2 15 10 0.013 9000 0.620 [15.75] 0.045 [1.15] ihb-2 18 10 0.018 7200 0.615 [15.62] 0.040 [1.02] ihb-2 22 10 0.019 7200 0.615 [15.62] 0.040 [1.02] ihb-2 27 10 0.026 5500 0.575 [14.61] 0.036 [0.912] ihb-2 33 10 0.029 5500 0.575 [14.61] 0.036 [0.912] ihb-2 39 10 0.030 5500 0.600 [15.24] 0.036 [0.912] ihb-2 47 10 0.035 5500 0.600 [15.24] 0.036 [0.912] ihb-2 56 10 0.039 5500 0.600 [15.24] 0.036 [0.912] ihb-2 68 10 0.053 4800 0.600 [15.24] 0.032 [0.812] ihb-2 82 10 0.060 4800 0.600 [15.24] 0.032 [0.812] ihb-2 100 10 0.080 4000 0.600 [15.24] 0.028 [0.723] ihb-2 120 10 0.090 4000 0.600 [15.24] 0.028 [0.723] ihb-2 150 10 0.098 4000 0.600 [15.24] 0.028 [0.723] ihb-2 180 10 0.110 4000 0.600 [15.24] 0.028 [0.723] ihb-2 220 10 0.150 2800 0.600 [15.24] 0.025 [0.644] ihb-2 270 10 0.213 2000 0.600 [15.24] 0.023 [0.573] ihb-2 330 10 0.305 1600 0.600 [15.24] 0.020 [0.510] ihb-2 390 10 0.320 1600 0.600 [15.24] 0.020 [0.510] ihb-2 470 10 0.355 1600 0.590 [14.99] 0.020 [0.510] ihb-2 560 10 0.388 1600 0.590 [14.99] 0.020 [0.510] ihb-2 680 10 0.430 1600 0.590 [14.99] 0.020 [0.510] ihb-2 820 10 0.590 1300 0.590 [14.99] 0.018 [0.455] ihb-2 1000 10 0.818 1000 0.590 [14.99] 0.016 [0.405] ihb-2 1200 10 1.140 800 0.590 [14.99] 0.014 [0.361] ihb-2 1500 10 1.260 800 0.590 [14.99] 0.014 [0.361] ihb-2 1800 10 1.390 800 0.590 [14.99] 0.014 [0.361] ihb-2 2200 10 1.540 800 0.590 [14.99] 0.014 [0.361] ihb-3 1.0 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 1.2 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 1.5 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 1.8 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 2.2 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 2.7 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 3.3 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 3.9 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 4.7 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 5.6 20 0.003 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 6.8 20 0.004 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 8.2 20 0.004 21 000 0.790 [20.07] 0.072 [1.83] ihb-3 10 10 0.006 17 000 0.770 [19.56] 0.064 [1.63] ihb-3 12 10 0.008 13 500 0.750 [19.05] 0.057 [1.45] ihb-3 15 10 0.009 13 500 0.750 [19.05] 0.057 [1.45] standard electrical specifications model ind. at 1 khz (h) tol. (%) dcr max. ( ? ) rated dc current (ma) approx. lead e spacing maximum lead f diameter
document number: 34015 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 13-apr-11 3 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ihb filter inductors, high current, radial leaded vishay dale ihb-3 18 10 0.010 13 500 0.750 [19.05] 0.057 [1.45] ihb-3 22 10 0.011 13 500 0.750 [19.05] 0.057 [1.45] ihb-3 27 10 0.012 13 500 0.800 [20.32] 0.057 [1.45] ihb-3 33 10 0.017 13 500 0.780 [19.81] 0.051 [1.29] ihb-3 39 10 0.022 11 400 0.780 [19.81] 0.051 [1.29] ihb-3 47 10 0.024 9000 0.760 [19.30] 0.045 [1.15] ihb-3 56 10 0.026 9000 0.760 [19.30] 0.045 [1.15] ihb-3 68 10 0.029 9000 0.760 [19.30] 0.045 [1.15] ihb-3 82 10 0.032 9000 0.760 [19.30] 0.045 [1.150] ihb-3 100 10 0.034 9000 0.760 [19.30] 0.045 [1.150] ihb-3 120 10 0.046 7200 0.740 [18.80] 0.040 [1.020] ihb-3 150 10 0.064 5500 0.720 [18.29] 0.036 [0.912] ihb-3 180 10 0.072 5500 0.720 [18.29] 0.036 [0.912] ihb-3 220 10 0.080 5500 0.790 [20.07] 0.036 [0.912] ihb-3 270 10 0.110 4500 0.770 [19.56] 0.032 [0.812] ihb-3 330 10 0.122 4500 0.770 [19.56] 0.032 [0.812] ihb-3 390 10 0.169 4000 0.740 [18.80] 0.028 [0.723] ihb-3 470 10 0.187 4000 0.740 [18.80] 0.028 [0.723] ihb-3 560 10 0.205 4000 0.740 [18.80] 0.028 [0.723] ihb-3 680 10 0.256 2800 0.725 [18.42] 0.025 [0.644] ihb-3 820 10 0.288 2800 0.725 [18.42] 0.025 [0.644] ihb-3 1000 10 0.426 2000 0.715 [18.16] 0.023 [0.573] ihb-3 1200 10 0.462 2000 0.760 [19.30] 0.023 [0.573] ihb-3 1500 10 0.518 2000 0.760 [19.30] 0.023 [0.573] ihb-3 1800 10 0.705 1600 0.740 [18.80] 0.020 [0.510] ihb-3 2200 10 1.020 1300 0.720 [18.29] 0.018 [0.455] ihb-3 2700 10 1.140 1300 0.720 [18.29] 0.018 [0.455] ihb-3 3300 10 1.270 1300 0.720 [18.29] 0.018 [0.455] ihb-3 3900 10 1.670 1000 0.700 [17.78] 0.016 [0.405] ihb-3 4700 10 1.860 1000 0.730 [18.54] 0.016 [0.405] ihb-4 1.8 20 0.002 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 2.2 20 0.002 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 2.7 20 0.003 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 3.3 20 0.003 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 3.9 20 0.003 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 4.7 20 0.003 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 5.6 20 0.004 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 6.8 20 0.004 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 8.2 20 0.004 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 10 10 0.005 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 12 10 0.005 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 15 10 0.006 27 000 1.10 [27.94] 0.072 [1.83] ihb-4 18 10 0.008 27 000 1.10 [27.94] 0.064 [1.63] ihb-4 22 10 0.009 21 000 1.10 [27.94] 0.064 [1.63] ihb-4 27 10 0.010 21 000 1.10 [27.94] 0.064 [1.63] ihb-4 33 10 0.011 21 000 1.10 [27.94] 0.064 [1.63] ihb-4 39 10 0.012 21 000 1.10 [27.94] 0.064 [1.63] ihb-4 47 10 0.018 14 400 1.10 [27.94] 0.057 [1.45] ihb-4 56 10 0.019 14 400 1.11 [28.19] 0.057 [1.45] ihb-4 68 10 0.021 14 400 1.11 [28.19] 0.057 [1.45] ihb-4 82 10 0.023 14 400 1.11 [28.19] 0.057 [1.45] ihb-4 100 10 0.025 14 400 1.11 [28.19] 0.057 [1.45] ihb-4 120 10 0.028 14 400 1.11 [28.19] 0.057 [1.45] ihb-4 150 10 0.040 11 400 1.10 [27.94] 0.051 [1.29] ihb-4 180 10 0.045 11 400 1.10 [27.94] 0.051 [1.29] ihb-4 220 10 0.050 11 400 1.10 [27.94] 0.051 [1.29] ihb-4 270 10 0.056 11 400 1.10 [27.94] 0.051 [1.29] ihb-4 330 10 0.074 11 400 1.16 [29.46] 0.045 [1.15] ihb-4 390 10 0.082 9000 1.13 [28.70] 0.045 [1.15] ihb-4 470 10 0.114 7200 1.13 [28.70] 0.040 [1.02] ihb-4 560 10 0.125 7200 1.13 [28.70] 0.040 [1.02] ihb-4 680 10 0.139 7200 1.13 [28.70] 0.040 [1.02] ihb-4 820 10 0.154 7200 1.13 [28.70] 0.040 [1.02] ihb-4 1000 10 0.216 5500 1.10 [27.94] 0.036 [0.912] ihb-4 1200 10 0.232 5500 1.10 [27.94] 0.036 [0.912] ihb-4 1500 10 0.324 4500 1.14 [28.96] 0.032 [0.812] ihb-4 1800 10 0.360 4500 1.14 [28.96] 0.032 [0.812] ihb-4 2200 10 0.494 4000 1.11 [28.19] 0.028 [0.723] ihb-4 2700 10 0.555 4000 1.11 [28.19] 0.028 [0.723] ihb-4 3300 10 0.773 2800 1.09 [27.69] 0.025 [0.644] standard electrical specifications model ind. at 1 khz (h) tol. (%) dcr max. ( ? ) rated dc current (ma) approx. lead e spacing maximum lead f diameter
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34015 4 revision: 13-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ihb vishay dale filter inductors, high current, radial leaded ihb-4 3900 10 0.845 2800 1.09 [27.69] 0.025 [0.644] ihb-4 4700 10 1.140 2000 1.07 [27.18] 0.023 [0.573] ihb-4 5600 10 1.600 2000 1.05 [26.67] 0.020 [0.510] ihb-4 6800 10 1.760 1600 1.05 [26.67] 0.020 [0.510] ihb-4 8200 10 1.950 1600 1.09 [27.69] 0.020 [0.510] ihb-4 10 000 10 2.760 1300 1.07 [27.18] 0.018 [0.455] ihb-4 12 000 10 3.040 1300 1.07 [27.18] 0.018 [0.455] ihb-4 15 000 10 3.390 1300 1.07 [27.18] 0.018 [0.455] ihb-5 1.8 20 0.002 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 2.2 20 0.002 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 2.7 20 0.002 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 3.3 20 0.002 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 3.9 20 0.003 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 4.7 20 0.003 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 5.6 20 0.003 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 6.8 20 0.003 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 8.2 20 0.003 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 10 10 0.004 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 12 10 0.004 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 15 10 0.005 35 000 1.13 [28.70] 0.081 [2.05] ihb-5 18 10 0.007 27 000 1.10 [27.94] 0.072 [1.83] ihb-5 22 10 0.007 27 000 1.10 [27.94] 0.072 [1.83] ihb-5 27 10 0.008 27 000 1.10 [27.94] 0.072 [1.83] ihb-5 33 10 0.009 27 000 1.10 [27.94] 0.072 [1.83] ihb-5 39 10 0.010 27 000 1.10 [27.94] 0.072 [1.83] ihb-5 47 10 0.011 27 000 1.10 [27.94] 0.072 [1.83] ihb-5 56 10 0.013 21 000 1.10 [27.94] 0.072 [1.83] ihb-5 68 10 0.015 21 000 1.10 [27.94] 0.072 [1.83] ihb-5 82 10 0.017 21 000 1.10 [27.94] 0.072 [1.83] ihb-5 100 10 0.018 21 000 1.10 [27.94] 0.072 [1.83] ihb-5 120 10 0.022 17 000 1.08 [27.43] 0.064 [1.63] ihb-5 150 10 0.025 17 000 1.08 [27.43] 0.064 [1.63] ihb-5 180 10 0.035 13 500 1.12 [28.45] 0.057 [1.45] ihb-5 220 10 0.040 13 500 1.12 [28.45] 0.057 [1.45] ihb-5 270 10 0.044 13 500 1.12 [28.45] 0.057 [1.45] ihb-5 330 10 0.049 13 500 1.12 [28.45] 0.057 [1.45] ihb-5 390 10 0.070 11 400 1.09 [27.69] 0.051 [1.29] ihb-5 470 10 0.078 11 400 1.09 [27.69] 0.051 [1.29] ihb-5 560 10 0.105 9000 1.07 [27.18] 0.045 [1.15] ihb-5 680 10 0.115 9000 1.07 [27.18] 0.045 [1.15] ihb-5 820 10 0.127 9000 1.07 [27.18] 0.045 [1.15] ihb-5 1000 10 0.176 7200 1.05 [26.67] 0.040 [1.02] ihb-5 1200 10 0.195 7200 1.05 [26.67] 0.040 [1.02] ihb-5 1500 10 0.274 5500 1.03 [26.16] 0.036 [0.912] ihb-5 1800 10 0.302 5500 1.10 [27.94] 0.036 [0.912] ihb-5 2200 10 0.338 5500 1.10 [27.94] 0.036 [0.912] ihb-5 2700 10 0.459 4500 1.08 [27.43] 0.032 [0.812] ihb-5 3300 10 0.642 4000 1.06 [26.92] 0.028 [0.723] ihb-5 3900 10 0.699 4000 1.06 [26.92] 0.028 [0.723] ihb-5 4700 10 0.775 4000 1.06 [26.92] 0.028 [0.723] ihb-5 5600 10 0.843 4000 1.06 [26.92] 0.028 [0.723] ihb-5 6800 10 1.150 2800 1.04 [26.42] 0.025 [0.644] ihb-5 8200 10 1.260 2800 1.09 [27.69] 0.025 [0.644] ihb-5 10 000 10 1.740 2000 1.07 [27.18] 0.023 [0.573] ihb-5 12 000 10 1.920 2000 1.07 [27.18] 0.023 [0.573] ihb-5 15 000 10 2.170 2000 1.07 [27.18] 0.023 [0.573] ihb-6 4.7 20 0.002 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 5.6 20 0.002 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 6.8 20 0.003 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 8.2 20 0.003 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 10 10 0.003 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 12 10 0.004 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 15 10 0.004 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 18 10 0.005 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 22 10 0.005 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 27 10 0.006 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 33 10 0.006 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 39 10 0.006 35 000 1.43 [36.32] 0.102 [2.59] ihb-6 47 10 0.008 35 000 1.53 [38.86] 0.102 [2.59] ihb-6 56 10 0.009 35 000 1.53 [38.86] 0.102 [2.59] standard electrical specifications model ind. at 1 khz (h) tol. (%) dcr max. ( ? ) rated dc current (ma) approx. lead e spacing maximum lead f diameter
document number: 34015 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 13-apr-11 5 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ihb filter inductors, high current, radial leaded vishay dale ihb-6 68 10 0.009 35 000 1.53 [38.86] 0.102 [2.59] ihb-6 82 10 0.010 35 000 1.53 [38.86] 0.102 [2.59] ihb-6 100 10 0.014 27 000 1.45 [36.83] 0.081 [2.05] ihb-6 120 10 0.015 27 000 1.45 [36.83] 0.081 [2.05] ihb-6 150 10 0.023 21 000 1.41 [35.81] 0.072 [1.83] ihb-6 180 10 0.025 21 000 1.41 [35.81] 0.072 [1.83] ihb-6 220 10 0.028 21 000 1.41 [35.81] 0.072 [1.83] ihb-6 270 10 0.030 21 000 1.41 [35.81] 0.072 [1.83] ihb-6 330 10 0.040 17 000 1.38 [35.05] 0.064 [1.63] ihb-6 390 10 0.055 13 500 1.35 [34.29] 0.057 [1.45] ihb-6 470 10 0.061 13 500 1.35 [34.29] 0.057 [1.45] ihb-6 560 10 0.068 13 500 1.35 [34.29] 0.057 [1.45] ihb-6 680 10 0.094 11 400 1.33 [33.78] 0.051 [1.29] ihb-6 820 10 0.104 11 400 1.33 [33.78] 0.051 [1.29] ihb-6 1000 10 0.143 9000 1.31 [33.27] 0.045 [1.15] ihb-6 1200 10 0.156 9000 1.40 [35.56] 0.045 [1.15] ihb-6 1500 10 0.219 7200 1.37 [34.80] 0.040 [1.02] ihb-6 1800 10 0.241 7200 1.37 [34.80] 0.040 [1.02] ihb-6 2200 10 0.270 7200 1.37 [34.80] 0.040 [1.02] ihb-6 2700 10 0.364 5500 1.34 [34.04] 0.036 [0.912] ihb-6 3300 10 0.498 4500 1.32 [33.53] 0.032 [0.812] ihb-6 3900 10 0.548 4500 1.32 [33.53] 0.032 [0.812] ihb-6 4700 10 0.608 4500 1.32 [33.53] 0.032 [0.812] ihb-6 5600 10 0.671 4500 1.38 [35.05] 0.032 [0.812] ihb-6 6800 10 0.750 4500 1.38 [35.05] 0.032 [0.812] ihb-6 8200 10 1.030 4000 1.35 [34.29] 0.028 [0.723] ihb-6 10 000 10 1.160 4000 1.35 [34.29] 0.028 [0.723] ihb-6 12 000 10 1.540 2800 1.33 [33.78] 0.025 [0.644] ihb-6 15 000 10 1.750 2800 1.33 [33.78] 0.025 [0.644] ihb-6 18 000 10 1.940 2800 1.38 [35.05] 0.025 [0.644] ihb-6 22 000 10 2.740 2000 1.36 [34.54] 0.023 [0.573] ihb-6 27 000 10 3.710 1700 1.33 [33.78] 0.020 [0.510] ihb-6 33 000 10 4.160 1700 1.33 [33.78] 0.020 [0.510] ihb-6 39 000 10 5.550 1400 1.31 [33.27] 0.018 [0.455] ihb-6 47 000 10 6.190 1400 1.34 [34.04] 0.018 [0.455] marking - model - value - date code ordering information ihb-1 10 h 10 % eb e2 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number ihb1 eb 100 k model package code inductance value inductance tolerance standard electrical specifications model ind. at 1 khz (h) tol. (%) dcr max. ( ? ) rated dc current (ma) approx. lead e spacing maximum lead f diameter
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
